The Griffin Technology DJ Cable is designed to be used with iOS mobile devices and enables the Split Output function when using the djay algoriddim app. With Split Output mode enabled, djay sends the master output to the left channel, and the cue output to the right channel. This lets you cue songs through your headphones independently of the mix that's going through the speakers. The cable has connectors for the speaker system, headphones and audio jack for your device.
For iOS mobile devices - enables Split Output when using djay app
Splitter cable allows you to hear the speaker mix and the song being cued up
Connectors for speaker system, headphones and audio jack on your iOS device
Previewing with headphones
The ability to pre-cue, or preview, the next track through your headphones is essential for any DJ to seamlessly mix the currently playing track into the next track. This allows for finding the perfect next track, flawless beatmatching, and creating a mix customized for your crowd.
In djay, there are two ways you can pre-cue your tracks: by using the Split Output function paired with a stereo/mono DJ split cable, or by connecting an external sound card or DJ controller.
A proper DJ split cable lets you cue up the next track in your headphones independently from what the crowd is currently hearing from the speakers, allowing for a smooth mix.
DJ split cables can be enabled through djay’s Split Output function for pre-cueing. Optimal features you want to look for are gold-plated connectors for improved conductivity and better signal, as well as a durable exterior for longevity.
Note: A DJ split cable splits your stereo jack into two mono channels. This means your speaker output using this setup will always be mono (using two duplicate mono output channels).
Battery monitoring with the smartphone - with the intAct Battery-Guard you always keep an eye on your battery.
With the intAct Battery-Guard and the free Apple or Android app, you are now able to check the charge status of your battery quickly and easily, because only in a steady, positive battery state of charge, the full capacity and usability is ensured. The positive battery charge condition also prevents possible early damage or a failure of the battery. After the easy installation to the battery by ring eyelets and after downloading of the Android or Apple app, the current voltage value can be retrieved. The transmitter is suitable for 6 V, 12 V and 24 V batteries. The range is about 6 meters. The four-colour, tachometer-like display shows the state of charge in dark green (fully charged), light green (partially charged), orange (unloaded) and red (fully discharged). In addition, the voltage value is represented alphanumerically. When dropping below the minimum voltage a reference will be made to recharge the battery as soon as possible.
By using the app, the voltage of up to 5 batteries can be monitored, obviously an intAct Battery-Guard has to be installed at each battery.
•Up to 5 vehicles can be monitored
•Monitoring of 6, 12 and 24 volts possible
•Easy installation by ring eyelets to the battery
•Power consumption is only about 2 mW
•No damage to the transmitter or the battery if polarity is reversed
•Free Download of the App "intAct Battery-Guard" in the App Store or the Google Play Store
Length:4.6m / Radial length:approx.1.8m / Weight:4.9kg
Max.power rating:200W(SSB) / Impedance:50ohms / VSWR:Less than 1.5:1
Rated wind velocity:40m/sec. / Mast diameter accepted:30mm to 62mm
Connector: SO239 female UHF / Type: Self support 6 band trapped vertical antenna with trapped radials.Radial elements can be set for one direction.
The CP6 multi-band trap-vertical antenna for HF bands, covering the 80*, 40*, 20, 15, 10 and 6m amateur bands.
Made from heavy duty aluminum, the CP6A assembles easily, yeilds excellent performance and reliability from a compact base station antenna.
Its compact size allows for many mounting options. Minimum 15' diameter required for mounting radials. No additional ground radials required.
• Compact size
• Heavy-duty aluminum antenna sections
• Easy assembly
• No additional ground radials required
• Mounting hardware included
Frequency: 75 - 40 - 20 - 15 - 10 - 6m
Power: 200 watts PEP
Impedance (output): 50 ohms
VSWR: 1.8:1 (Nominal)
Element Phasing: 1/4 wave trap vertical groundplane.
Radials: Six, Trap design.
Grounding: Direct grounding. Antenna element and radials connedted to mounting pipe.
Max Wind Rating: 80 mph (no ice)
Mast Diameter Acceptance: 1.2" - 2.4"
Overall Length: 15.1' (4.6m)
Weight: 9.9 lbs. (4.9kg)
Connector: SO239 female UHF
CDJ-800 x 2 ตัว ราคาตัวละ 5800 ฿ รวมส่ง
DJM-600 x 1 ตัว ราคาตัวละ 16900 ฿ รวมส่ง
Flight case สำหรับใส่ เครื่องเล่น+มิกซ์ ราคาตัวละ 5000 ฿ รวมส่ง
ราคาแยก รวม 33500
เหมายกชุด 29900 ฿ พร้อมส่งฟรีทั่วไทย
หรือ Line ID: ctek.thai
The CDJ-800 is built around the company‘s acclaimed Jog Wheel technology. In response to feedback from the pro-DJ community, Pioneer has also added completely new and unique features:
Scratch the same sound repeatedly, without re-cueing every time
Auto Beat Loop
DJs can create a perfect 1/2, 1/4, 1/8 or full bar (1/1) beat loop instantly, just by touching the right button.
"Wide" Pitch Control
Create new sound effects and BPM match completely different tracks
One button touch release
Adjust Jog Wheel sensitivity to suit individual DJing styles
Ensure digital purity and functionality in hi-tech environments
These ground-breaking functions are packed inside a compact and durable casing that makes the CDJ-800 ideal for surviving life on the road and for playing-out in tough club environments. A world-beating combination of new and proven features, the CDJ-800 feels like a vinyl deck and delivers digital player power to home-DJs, mobile professionals and superstar DJs everywhere.